Every tower, every asset, one live picture — act before it fails.
Overview
RaMS watches over everything that keeps a telecom site alive — the grid supply, batteries, diesel generators, solar, rectifiers, sensors and site devices — across all of your towers, in real time, on any screen. Controllers at each site stream readings every few minutes and push alarms the instant something goes wrong, so your team sees trouble the moment it starts and can act before a site goes dark.
The Problem We Solve
A telecom network is only as strong as its weakest site. Power assets at remote towers — batteries, generators, rectifiers, solar — fail quietly, and the first sign is usually a site outage, an emergency truck-roll, or an angry escalation. Field teams waste trips checking healthy sites while a weak one slips through. RaMS replaces guesswork with one simple, live view of every asset at every site.
What RaMS Does for You
See all of your sites and every power asset live, from one place.
Get an instant alert the moment anything goes wrong — graded Critical, Major or Minor.
Drill from the network view to a single site, a single asset, even a single battery cell.
Switch loads remotely — aircon and DG on/off from your desk, over MQTT.
Watch site security too — door, smoke, flood, motion sensors and site cameras.
See how much diesel and carbon every site is saving, today and this month.
Arrange the screens your way — build your own dashboards and widgets, no software changes needed.
Work in your language — English, Malay, Indonesian, Filipino, Chinese, Tamil, Arabic, and any language your admin adds.
Use it on a computer, tablet or phone — light, dark or glassy theme.
Predict Problems Before They Happen
RaMS does more than report failures — it helps you see them coming.
Early warning — weakening batteries, falling solar yield, rising rectifier load and abnormal grid behaviour are flagged before they cause an outage.
Replace on condition, not guesswork — SOC, SOH, imbalance and efficiency trends tell you when an asset truly needs attention.
Fewer surprise outages — voltage and current trends, phase imbalance and fuel levels are tracked continuously so small issues stay small.
Plan and Track Maintenance
A built-in calendar for inspections, service visits and replacements — with alarm history alongside.
A complete record for every site — photos, documents, in-charge contacts, controllers and SIM cards, battery bank and cell layout, DG and solar details.
Next-service dates on every sensor and device, so nothing is forgotten.
Hand over smoothly — when staff change, the full site record stays with the site.
The Benefits
Fewer outages and fewer unpleasant surprises across the network.
Fewer and shorter site visits — and lower operating costs.
Longer asset life — batteries, generators and rectifiers serviced when they need it, not before.
Lower diesel bills and a clear, measurable sustainability story.
One simple view for the whole network — and one click down to any detail.
Safe, secure and easy for anyone to use, with role-based access.
Other Handy Features
Health at a glance — every site and asset colour-coded: green healthy, amber caution, red urgent.
Instant alerts by site and by asset, so the right team responds quickly.
Every table searchable, filterable and exportable to CSV — raw 5-minute data included.
Fuel and carbon savings tracked automatically, per site and network-wide.
A live map of all your sites, colour-coded by status, with one-click site drill-down.
Your own dashboards — drag, drop and resize the widgets you care about, or design new ones.
Multi-tenant sites supported — see each tenant's assets separately on the same tower.
Weather at the site — temperature, wind, precipitation and local time beside the live readings.
Where RaMS Helps
Mobile Operators (MNOs) — network-wide visibility of every BTS site's power chain, from grid input to battery cell, with alarms routed to the right regional team.
Tower Companies (TowerCos) — manage thousands of shared sites and their tenants from one screen, with a complete asset and maintenance record per tower for SLA reporting.
Managed Service Providers — run O&M for multiple customers with clear per-site histories, planned visits instead of emergency call-outs, and exportable proof of work.
Rural & Off-grid Sites — solar-DG-battery hybrid sites kept in balance remotely; cut generator run-time and travel only when there is a genuine reason.
In-Building & BTS Hotels — indoor sites and shared hotels monitored alongside outdoor towers, with the same drill-down detail.
Border & Remote Regions — sensors, cameras and door alarms flag theft or tampering at unmanned sites the moment it happens.
A Greener Bottom Line
Every hour a site runs on grid, solar or battery instead of a diesel generator, you save fuel and cut carbon. RaMS adds this up for you in plain numbers — for each site and for the whole network, for today and for the month — right on the dashboard.
What You Will See On Screen
Main Dashboard — your whole network at a glance
Live Alarms banner and vital-sign cards — Avg Voltage, Avg Current, Grid kWh, Run Hours, Charge, Discharge, DG kWh and Temperature.
Total Sites with a live colour-coded map, Power Source Distribution, Alert Status gauge and Green Energy usage — each card flips to deeper detail.
Site Lists in card or table view, filterable by region, site type and power source.
Site Dashboard — a closer look at one site
Site identity, location, cooling, tenants and live weather at the site.
Site Overview strip — system voltage, load, rectifier and battery readings at a glance.
Asset cards for Rectifier, Grid, Battery, Generator and Solar — each with live values and one-click drill-down to Summary, Performance, KPI and Raw Data.
Site sensors, camera views and remote device control (aircon, DG).
This site's carbon saved — today and this month — and its alarm overview.
Asset Detail — Summary, Performance, KPI, Raw Data
Grid: phase imbalance gauges, power factor, consumption and usage trends.
Battery: bank tiles, per-battery SOC/SOH, cell structure and energy in/out.
Generator: fuel consumption, efficiency, run hours and power trends.
Solar: panel parameters, efficiency, utilisation and production.
Rectifier: module status, load, efficiency and input/output trends.
Site Management — add and edit sites with map location, battery bank designer, photos, documents, in-charge contacts, controllers and SIM cards.
Why RaMS
The assets that keep your network on air are too important to leave unseen. RaMS gives you a single, clear, real-time view of every site and every asset you depend on — and warns you in time to act. Fewer outages, lower costs, longer-lasting assets, and a real, measurable cut in diesel and carbon — all from one simple, secure platform.
